Michele Bacciocchi

Docente a contratto

Corso di Laurea Triennale in Ingegneria Civile / IASA

ms.msrinu@ihccoiccab.elehcim

0549 888 111

Sito web non disponibile

Curriculum vitæ non disponibile

insegnamenti

Complementi di Scienza delle Costruzioni


Orario di ricevimento


Si riceve per appuntamento, tramite e-mail.


Profilo biografico

Nato a San Marino il 3 ottobre 1990, nel 2012 ha conseguito la Laurea Triennale con Lode in Ingegneria Civile presso l’Università di Bologna discutendo una tesi in Scienza delle Costruzioni dal titolo “Analisi statica del solaio di copertura della Chiesa di Torraccia”.

Nel 2014 ha conseguito la Laurea Magistrale con Lode in Ingegneria Civile (curriculum Strutture), presso l’Università di Bologna discutendo una tesi in Dinamica delle Strutture dal titolo “Teorie di Ordine Superiore per Strutture a Doppia Curvatura in Materiale Anisotropo”.

Ha ottenuto il titolo di Dottore di Ricerca in Ingegneria Civile, Chimica Ambientale e dei Materiali presso l’Università di Bologna nel 2018, discutendo una tesi di dottorato dal titolo “Higher-order Strong and Weak Formulations for Arbitrarily Shaped Doubly-Curved Shells Made of Advanced Materials”.
È stato Research Scholar presso la Texas A&M University (College Station, Texas) nel periodo settembre 2016 – Febbraio 2017, sotto la supervisione del Prof. J.N. Reddy.
È stato assegnista di ricerca presso il Dipartimento di Ingegneria Civile, Chimica Ambientale e dei Materiali (DICAM) dell’Università di Bologna) fino al 2018.

Dal 2018 è Professore a Contratto presso Università degli Studi della Repubblica di San Marino per il Corso di Laurea Triennale in Ingegneria Civile per l’insegnamento di “Complementi di Scienza delle Costruzioni”.

Aree di interesse

L’attività di ricerca ha riguardato le seguenti tematiche:

  • Meccanica delle strutture (teoria di piastre e gusci, teoria delle travi).
  • Meccanica computazionale (metodo Generalizzato di Quadratura Differenziale, metodo agli Elementi Finiti).
  • Teoria dell’elasticità (viscoelasticità).

Materiali innovativi (materiali compositi laminati, Carbon nanotubes, compositi multifase).

Pubblicazioni

Articoli in riviste internazionali

  1. M. Bacciocchi, A.M. Tarantino (2019) - Time-dependent behavior of viscoelastic three-phase composite plates reinforced by Carbon nanotubes, Composite Structures 216, 20-31.
  2. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2019) - Refined Shear Deformation Theories for Laminated Composite Arches and Beams with Variable Thickness: Natural Frequency Analysis, Engineering Analysis with Boundary Elements 100, 24-47.
  3. F. Tornabene, M. Bacciocchi, N. Fantuzzi, J.N. Reddy (2019) - Multiscale Approach for Three-Phase CNT/Polymer/Fiber Laminated Nanocomposite Structures, Polymer Composites 40, E102-E126.
  4. M. Arefi, E.M.-R. Bidgoli, R. Dimitri, M. Bacciocchi, F. Tornabene (2019) - Nonlocal bending analysis of curved nanobeams reinforced by graphene nanoplatelets, Composites Part B Engineering 166, 1-12.
  5. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2019) - Foam Core Composite Sandwich Plates and Shells with Variable Stiffness: Effect of Curvilinear Fiber Path on the Modal Response, Journal of Sandwich Structures and Materials 21, 320-365.
  6. F. Tornabene, M. Bacciocchi (2018) - Dynamic stability of doubly-curved multilayered shells subjected to arbitrarily oriented angular velocities: Numerical evaluation of the critical speed, Composite Structures 201, 1031-1055.
  7. M. Arefi, E.M.-R. Bidgoli, R. Dimitri, M. Bacciocchi, F. Tornabene (2018) - Application of sinusoidal shear deformation theory and physical neutral surface to analysis of functionally graded piezoelectric plate, Composites Part B Engineering 151, 35-50.
  8. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2018) - Strong and Weak Formulations Based on Differential and Integral Quadrature Methods for the Free Vibration Analysis of Composite Plates and Shells: Convergence and Accuracy, Engineering Analysis with Boundary Elements 92, 3-37.
  9. N. Fantuzzi, F. Tornabene, M. Bacciocchi, A.J.M. Ferreira (2018) - On the Convergence of Laminated Composite Plates of Arbitrary Shape through Finite Element Models, Journal of Composites Science 2, 16, 1-50.
  10. F. Tornabene, M. Bacciocchi (2018) - Effect of Curvilinear Reinforcing Fibers on the Linear Static Behavior of Soft-Core Sandwich Structures, Journal of Composites Science 2, 14, 1-43.
  11. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2018) - Mechanical Behavior of Damaged Laminated Composites Plates and Shells: Higher-Order Shear Deformation Theories, Composite Structures 189, 304-329.
  12. F. Zare Jouneghani, P. Mohammadi Dashtaki, R. Dimitri, M. Bacciocchi, F. Tornabene (2018) - First-Order Shear Deformation Theory for Orthotropic Doubly-Curved Shells Based on a Modified Couple Stress Elasticity, Aerospace Science and Technology 73, 129-147.
  13. F. Zare Jouneghani, R. Dimitri, M. Bacciocchi, F. Tornabene (2017) - Free Vibration Analysis of Functionally Graded Porous Doubly-Curved Shells Based on the First-Order Shear Deformation Theory, Applied Sciences 7, 1252, 1-20.
  14. D. Banić, M. Bacciocchi, F. Tornabene, A.J.M. Ferreira (2017) - Influence of Winkler-Pasternak Foundation on the Vibrational Behavior of Plates and Shells Reinforced by Agglomerated Carbon Nanotubes, Applied Sciences 7, 1228, 1-55.
  15. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2017) - Mechanical Behaviour of Composite Cosserat Solids in Elastic Problems with Holes and Discontinuities, Composite Structures 179, 468-481.
  16. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2017) - Linear Static Behavior of Damaged Laminated Composite Plates and Shells, Materials 10, 811, 1-52.
  17. N. Fantuzzi, F. Tornabene, M. Bacciocchi, A.M.A. Neves, A.J.M. Ferreira (2017) - Stability and Accuracy of Three Fourier Expansion-Based Strong Form Finite Elements for the Free Vibration Analysis of Laminated Composite Plates, International Journal for Numerical Methods in Engineering 111, 354-382.
  18. F. Tornabene, N. Fantuzzi, M. Bacciocchi, J.N. Reddy (2017) - A Posteriori Stress and Strain Recovery Procedure for the Static Analysis of Laminated Shells Resting on Nonlinear Elastic Foundation, Composites Part B Engineering 126, 162-191.
  19. E. Viola, F. Tornabene, N. Fantuzzi, M. Bacciocchi (2017) - Numerical Investigation of Composite Materials with Inclusions and Discontinuities, Key Engineering Materials 747, 69-76.
  20. N. Fantuzzi, F. Tornabene, M. Bacciocchi, R. Dimitri (2017) - Free Vibration Analysis of Arbitrarily Shaped Functionally Graded Carbon Nanotube-Reinforced Plates, Composites Part B Engineering 115, 384-408.
  21. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2017) - Linear Static Response of Nanocomposite Plates and Shells Reinforced by Agglomerated Carbon Nanotubes, Composites Part B Engineering, Composites Part B Engineering 115, 449-476.
  22. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2017) - Finite Elements Based on Strong and Weak Formulations for Structural Mechanics: Stability, Accuracy and Reliability, International Journal of Engineering & Applied Sciences 9, 1-21.
  23. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2017) - A New Doubly-Curved Shell Element for the Free Vibrations of Arbitrarily Shaped Laminated Structures Based on Weak Formulation IsoGeometric Analysis, Composite Structures 171, 429-461.
  24. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola, J.N. Reddy (2017) - A Numerical Investigation on the Natural Frequencies of FGM Sandwich Shells with Variable Thickness by the Local Generalized Differential Quadrature Method, Applied Sciences 7, 131, 1-39.
  25. F. Tornabene, N. Fantuzzi, M. Bacciocchi, J.N. Reddy (2017) - An Equivalent Layer-Wise Approach for the Free Vibration Analysis of Thick and Thin Laminated Sandwich Shells, Applied Sciences 7, 17, 1-34.
  26. S. Brischetto, F. Tornabene, N. Fantuzzi, M. Bacciocchi (2017) - Interpretation of Boundary Conditions in the Analytical and Numerical Shell Solutions for Mode Analysis of Multilayered Structures, International Journal of Mechanical Sciences 122, 18-28.
  27. F. Tornabene, S. Brischetto, N. Fantuzzi, M. Bacciocchi (2017) - Boundary Conditions in 2D Numerical and 3D Exact Models for Cylindrical Bending Analysis of Functionally Graded Structures, Shock and Vibration, Vol. 2016, Article ID 2373862, 1-17.
  28. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2016) - On the Mechanics of Laminated Doubly-Curved Shells Subjected to Point and Line Loads, International Journal of Engineering Science 109, 115-164.
  29. M. Bacciocchi, M. Eisenberger, N. Fantuzzi, F. Tornabene, E. Viola (2016) - Vibration Analysis of Variable Thickness Plates and Shells by the Generalized Differential Quadrature Method, Composite Structures 156, 218-237.
  30. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2016) - The GDQ Method for the Free Vibration Analysis of Arbitrarily Shaped Laminated Composite Shells Using a NURBS-Based Isogeometric Approach, Composite Structures 154, 190-218.
  31. F. Tornabene, N. Fantuzzi, M. Bacciocchi, A.M.A. Neves, A.J.M. Ferreira (2016) - MLSDQ Based on RBFs for the Free Vibrations of Laminated Composite Doubly-Curved Shells, Composites Part B: Engineering 99, 30-47.
  32. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2016) - The Local GDQ Method for the Natural Frequencies of Doubly-Curved Shells with Variable Thickness: A General Formulation, Composites Part B Engineering 92, 265-289.
  33. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2016) - Higher-Order Structural Theories for the Static Analysis of Doubly-Curved Laminated Composite Panels Reinforced by Curvilinear Fibers, Thin-Walled Structures 102, 222-245.
  34. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2016) - Effect of Agglomeration on the Natural Frequencies of Functionally Graded Carbon Nanotube-Reinforced Laminated Composite Doubly-Curved Shells, Composites Part B Engineering 89, 187-218.
  35. S. Brischetto, F. Tornabene, N. Fantuzzi, M. Bacciocchi (2015) - Refined 2D and Exact 3D Shell Models for the Free Vibration Analysis of Single- and Double-Walled Carbon Nanotubes, Technologies 3, 259-284.
  36. F. Tornabene, N. Fantuzzi, M. Bacciocchi, R. Dimitri (2015) - Free Vibrations of Composite Oval and Elliptic Cylinders by the Generalized Differential Quadrature Method, Thin-Walled Structures 97, 114-129.
  37. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2015) - Higher-Order Theories for the Free Vibration of Doubly-Curved Laminated Panels with Curvilinear Reinforcing Fibers by Means of a Local Version of the GDQ Method, Composites Part B Engineering 81, 196-230.
  38. F. Tornabene, N. Fantuzzi, M. Bacciocchi, R. Dimitri (2015) - Dynamic Analysis of Thick and Thin Elliptic Shell Structures Made of Laminated Composite Materials, Composite Structures 133, 278-299.
  39. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2015) - A New Approach for Treating Concentrated Loads in Doubly-Curved Composite Deep Shells with Variable Radii of Curvature, Composite Structures 131, 433-452.
  40. N. Fantuzzi, M. Bacciocchi, F. Tornabene, E. Viola, A.J.M. Ferreira (2015) - Radial Basis Functions Based on Differential Quadrature Method for the Free Vibration of Laminated Composite Arbitrary Shaped Plates, Composites Part B Engineering 78, 65-78.
  41. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2015) - Accurate Inter-Laminar Recovery for Plates and Doubly-Curved Shells with Variable Radii of Curvature Using Layer-Wise Theories, Composite Structures 124, 368-393.
  42. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2014) - The Local GDQ Method applied to general higher-order theories of doubly-curved laminated composite shells and panels: The free vibration analysis, Composite Structures 116, 637-660.
  43. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2014) - The Strong Formulation Finite Element Method: Stability and Accuracy, Fracture and Structural Integrity 29, 251-265.
  44. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2014) - Free Vibrations of Free-Form Doubly-Curved Shells made of Functionally Graded Materials using Higher-order Equivalent Single Layer Theories, Composites Part B Engineering 67, 490-509.

 

Atti di convegno

  1. F. Tornabene, M. Bacciocchi, N. Fantuzzi (2018) - Strong and Weak Formulations for the Analysis of Arbitrarily Shaped Laminated Composite Structures, XXII Convegno Italiano di Meccanica Computazionale - IX Riunione del Gruppo Materiali AIMETA (GIMC-GMA2018) - Ferrara, Italy, 13-14 September 2018.*
  2. N. Fantuzzi, M. Bacciocchi, F. Tornabene (2018) - Free vibration problem of composite plates of arbitrary shape: where do we stand?, 21st International Conference on Composite Structures (ICCS21) - Bologna, Italy, 4-7 September 2018. *
  3. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2018) - An innovative numerical approach for the mechanical analysis of damaged laminated composite structures, 9th International Conference on Computational Methods (ICCM2018) - Rome, Italy, 6-10 August 2018.
  4. N. Fantuzzi, M. Bacciocchi, F. Tornabene (2018) - Peculiar Convergence And Accuracy For Laminated Moderately Thick Plates Of Arbitrary Shape In Free Vibrations, 4th International Conference on Mechanics of Composites (MECHCOMP4) - Madrid, Spain, 9-12 July 2018.
  5. F. Tornabene, M. Bacciocchi, N. Fantuzzi (2018) - Critical Velocity Evaluation Of Rotating Laminated Composite Doubly-Curved Shells, 4th International Conference on Mechanics of Composites (MECHCOMP4) - Madrid, Spain, 9-12 July 2018. *
  6. Tornabene, N. Fantuzzi, M. Bacciocchi (2018) - Modelling of Damaged Laminated and Sandwich Shell Structures by means of Higher-order Shear Deformation Theories, 10th European Solid Mechanics Conference (ESMC2018) - Bologna, Italy, 2-6 July 2018. *
  7. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2017) - How to Easily Model Doubly Curved Shells with Variable Radii of Curvature, The 11th Conference on Shell Structures: Theory and Applications (SSTA11) - Gdańsk, Poland, 11-13 October 2017.
  8. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2017) - A Numerical Approach Based on the GDQ Method for the Linear Static Analysis of Laminated Composite Shells Subjected to Point and Line Loads, IV ECCOMAS Young Investigator Conference (YIC2017) - Milano, Italy, 13-15 September 2017. *
  9. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2017) - Isogeometric Analysis of Arbitrarily Shaped Structures: A Numerical Approach Based on the Strong Formulation, V International Conference on Isogeometric Analysis (IGA2017) - Pavia, Italy, 11-13 September 2017. *
  10. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2017) - Mechanical Behavior of Laminated Composite Shells with Arbitrary Domains: Comparison Between Weak and Strong Formulations, XXIII° Convegno Italiano dell’Associazione Italiana di Meccanica Teorica e Applicata (AIMETA2017) - Salerno, Italy, 4-7 September 2017.
  11. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2017) - Mechanical Behavior of Damaged Laminated Composites Plates and Shells: Higher-Order Shear Deformation Theories, 20th International Conference on Composite Structures (ICCS20) - Paris, France, 4-7 September 2017. *
  12. N. Fantuzzi, F. Tornabene, M. Bacciocchi, E. Viola (2017) - Composite Structures of Arbitrary Shape by Using Nonlinear Isogeometric Mapping, 20th International Conference on Composite Structures (ICCS20) - Paris, France, 4-7 September 2017.
  13. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2017) - Nanocomposite Plates and Shells Reinforced by Agglomerated Carbon Nanotubes: Static and Dynamic Analysis, The 25th Annual International Conference on Composite/Nano Engineering (ICCE25) - Roma, Italy, 16-22 July 2017. *
  14. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2017) - Investigation on the Structural Response of Plates and Shells with Variable Mechanical Properties: Modeling of the Damage, 3rd International Conference on Mechanics of Composites (MECHCOMP3) - Bologna, Italy, 4-7 July 2017. *
  15. N. Fantuzzi, F. Tornabene, M. Bacciocchi, E. Viola (2017) - Mechanics of Structural Components by Using a Numerical Approach Based on Blending Functions Mapping and a Strong Formulation, 3rd International Conference on Mechanics of Composites (MECHCOMP3) - Bologna, Italy, 4-7 July 2017.
  16. E. Viola, F. Tornabene, N. Fantuzzi, M. Bacciocchi (2017) - Numerical Investigation of Composite Materials with Inclusions and Discontinuities, Mechanics of Masonry Structures Strengthened with Composite Materials - Modeling, Testing, Design, Control (MuRiCo5) - Bologna, Italy, 28-30 June 2017.
  17. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2016) - Static and Dynamic Behavior of Functionally Graded Carbon Nanotube-Reinforced Laminated Composite Doubly-Curved Shells: Higher-Order Structural Approaches, Multiscale Innovative Materials and Structures (MIMS16) - Cetara, Italy, 28-30 October 2016.
  18. N. Fantuzzi, F. Tornabene, M. Bacciocchi, R. Dimitri (2016) - Free Vibration Analysis of Functionally Graded Carbon Nanotube-Reinforced Composite Plates with Arbitrary Domains and Discontinuities, Multiscale Innovative Materials and Structures (MIMS16) - Cetara, Italy, 28-30 October 2016.
  19. N. Fantuzzi, F. Tornabene, M. Bacciocchi, E. Viola (2016) - Isogeometric Analysis of Composite Structures Through Mapping Using Blending Functions, 19th International Conference on Composite Structures (ICCS19) - Porto, Portugal, 5-9 September 2016.
  20. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2016) - A General Formulation Based Based on Higher-Order Theories for the Static and Dynamic Analysis of Doubly-Curved Structures with Variable Mechanical and Geometrical Properties, 19th International Conference on Composite Structures (ICCS19) - Porto, Portugal, 5-9 September 2016. *
  21. N. Fantuzzi, F. Tornabene, M. Bacciocchi, E. Viola (2016) - Mechanics of Arbitrarily Shaped Composite Structures Using Isogeometric Mapping, 2nd International Conference on Mechanics of Composites (MECHCOMP2) - Porto, Portugal, 11-14 July 2016.
  22. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2016) - Higher-Order Theories for Structural Analysis of Doubly-Curved Shells with Variable Mechanical Properties, 2nd International Conference on Mechanics of Composites (MECHCOMP2) - Porto, Portugal, 11-14 July 2016. *
  23. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2016) - Finite Element Method based on a Strong Formulation Isogeometric Analysis, XXI Convegno Italiano di Meccanica Computazionale - VIII Riunione del Gruppo Materiali AIMETA (GIMC-GMA2016) - Lucca, Italy, 27-29 June 2016.
  24. N. Fantuzzi, F. Tornabene, M. Bacciocchi, E. Viola (2016) - Moving Least Squares Differential Quadrature Based on Radial Basis Functions for the Vibration Analysis of Beams, Plates and Shells, International Conference on Vibrations and Buckling (VibBuck2016) - Porto, Portugal, 7-9 March 2016.
  25. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2015) - Advanced Laminated Composite Applications for Doubly-Curved Shell Structural Componentes with Variable Curvature, XXIII° Conference of the Italian Association of Aeronautics and Astronautics (AIDAA2015) - Torino, Italy, 17-19 November 2015. *
  26. E. Viola, F. Tornabene, N. Fantuzzi, M. Bacciocchi (2015) - Structural Mechanics Applications Using Strong Formulation Finite Element Method, XXII° Convegno Italiano dell’Associazione Italiana di Meccanica Teorica e Applicata (AIMETA2015) - Genova, Italy, 14-17 September 2015.
  27. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2015) - Static and Dynamic Analyses of Doubly-Curved Composite Thick Shells with Variable Radii of Curvatures, XXII° Convegno Italiano dell’Associazione Italiana di Meccanica Teorica e Applicata (AIMETA2015) - Genova, Italy, 14-17 September 2015.
  28. N. Fantuzzi, M. Bacciocchi, F. Tornabene, E. Viola (2015) - Static and dynamic analyses of arbitrarily shaped laminated composite structures, International Conference on Shells, Plates and Beams (SPB 2015) - Bologna, Italy, 9-11 September 2015.
  29. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2015) - Higher-order theories for the structural analysis of doubly-curved shells and panels made of innovative materials, International Conference on Shells, Plates and Beams (SPB 2015) - Bologna, Italy, 9-11 September 2015. *
  30. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2015) - Computational Models for Laminated Doubly-Curved Shells with Variable Radii of Curvatures Using Weak and Strong Formulations, 9th European Solid Mechanics Conference (ESMC2015) - Madrid, Spain, 6-10 July 2015.
  31. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2015) - Advanced Applications for Laminated Doubly-Curved Shells with Variable Curvatures, 18th International Conference on Composite Structures (ICCS18) - Lisbon, Portugal, 15-18 June 2015. *
  32. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2015) - The Strong Formulation Finite Element Method Applied to Structural Mechanics Problems, GAMM 86th Annual Scientific Conference (GAMM2015) - Lecce, Italy, 23-27 March 2015.
  33. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2014) - The Strong Formulation Finite Element Method: Stability and Accuracy, XX Convegno Nazionale di Meccanica Computazionale, VII Riunione del Gruppo Materiali AIMETA (GIMC-GMA 2014) - Cassino (FR), Italy, 11-13 June 2014.

 

Libri

  1. F. Tornabene, M. Bacciocchi (2018) - Anisotropic Doubly-Curved Shells. Higher-Order Strong and Weak Formulations for Arbitrarily Shaped Shell Structures, Esculapio, Bologna. ISBN: 978-88-9385-080-3.
  2. F. Tornabene, N. Fantuzzi, M. Bacciocchi (2018) - DiQuMASPAB: Differential Quadrature for Mechanics of Anisotropic Shells, Plates, Arches and Beams. User Manual, Esculapio, Bologna. ISBN: 978-88-9385-063-6.
  3. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2016) - Laminated Composite Doubly-Curved Shell Structures I. Differential Geometry. Higher-Order Structural Theories, Esculapio, Bologna. ISBN: 978-88-7488-957-0. ISSN: 2421-2822.
  4. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2016) - Laminated Composite Doubly-Curved Shell Structures II. Differential and Integral Quadrature. Strong Formulation Finite Element Method, Esculapio, Bologna. ISBN: 978-88-7488-958-7. ISSN: 2421-2822.
  5. F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2015) - Strutture a Guscio in Materiale Composito II. Quadratura Differenziale e Integrale. Elementi Finiti in Forma Forte, Esculapio, Bologna. ISBN: 978-88-7488-856-6. ISSN: 2421-2822.

F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola (2015) - Strutture a Guscio in Materiale Composito I. Geometria Differenziale. Teorie di Ordine Superiore, Esculapio, Bologna. ISBN: 978-88-7488-855-9. ISSN: 2421-2822.